B61089QDR - B61089QDR Series

Series: B61089QDR
Questions? Contact Littelfuse Support
SIDACtor B61089QDR Hi Res
Roll Over to Zoom
Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

This component is designed to protect two different SLIC (Subscriber Line Interface Card) tip/ring pairs with independent voltage tracking for each pair. This B61089QDR will protect the SLIC interface against lightning induced surge and power fault events. It contains fast switching crowbarring structures for negative events and a simple fast switching diode structure for positive events. It is compatible with the Basic Levels of ITU K.20 and K.21. For compliance with the Enhanced Levels of ITU, TIA 968-B, or GR-1089, an additional series resistor in the tip and ring leads may be required.

The SLIC chipset voltage reference may change as the on-hook/off-hook line condition changes. Therefore, this component is referenced to the - VBAT so that its negative protection threshold follows this changing reference voltage level. This B610989QDR utilizes a transistor gain network so that a low 5 mA current level will activate the thyristor based portion of this protector component during negative events. This also allows an easier turn on during slow rising power fault events. For all positive disturbances, the fast switching diode connected to earth reference will provide the needed protection.

Features:

  • Dual port negative voltage tracking programmable component
  • Supports battery voltages down to -170V
  • Low gate triggering current 5 mA max
  • Fails in a short circuit condition when it is surged in excess of its ratings to protect all downstream equipment
  • Surge capability does not degrade after multiple surge events within its ratings
  • High holding current 150 mA min
  • Specified 2/10 limiting voltage
  • Integrated diodes for positive surge protection
  • ESD Immunity(HBM):JESD22 Class 3B, ≥8KV
  • MSL: Level 1 - unlimited
  • RoHS compliant and lead-free

Applications:

  • Wireless In the Local Loop (WLL)
  • Voice applications which require regenerated POTS
  • VoIP applications
  • PBX
  • FXS applications
  • Digital Pair Gain systems (DPG) and Digital Loop Carrier systems (DLC)
  • Small Office Home Office (SOHO)
Check Stock Order Samples
Property (Mouseover for details) Value
IDRM @ VDRM (μA) 5
Holding Current (mA) 150
Partner ECAD Models B61089QDR
Regulatory Requirements GR1089 INTRA-BUILDING
GR1089 I
Ipp2x10 120
Ipp5x310 70
Ipp8x20 170
Peak Off-State Voltage Tip to Ring (V) 170
Pins Tip to Ring 6-1/6-8
Pins Tip to Ground 6-4/6-5
Package MS-012 (SOP-8)

pdficon Littelfuse SIDACtor B61089QDR Series Datasheet

pdficon Circuit Protection Technology Application Matrix

Littelfuse is the world leader in the design and manufacturing of fuses for the automotive industrial handheld computer and telecom markets...
pdficon Circuit Protection Products Selection Guide

pdficon SIDACtor Catalog

SIDACtor components are solid state crowbar devices designed to protect telecom equipment during hazardous transient conditions...
Part # Part Description RoHS Pb-free RoHS (2015/ 863/EU) Certificate REACH (SVHC’s) Declaration Halogen Free REACH (SVHC’s) IPC-Material Declaration
B61089QDR Dual voltage negative SLIC protector RoHS No 06/28/2016 PbFree No 06/28/2016 CoC_RoHS10_B61089QDR REACH211_Declaration_B61089QDR Yes
06/28/2016		 Does not Contain IPC_B61089QDR
If the product environmental information that you are looking for does not appear in this tab,
please complete the Product Environmental Information Request Form.