リンクがクリップボードにコピーされました

シリーズ: FB120A FB230A

Flasher and Incandescent Beacon Alarm Relay

製品ステータス| i

FB120AとFB230Aは、2ランプ白熱警告灯一点とビーコンフラッシャー（または補助モジュール）一点の動作監視に使用される製品です。回路内の電流を感知することで点滅灯とランプ類を監視します。 If the lamp(s) or the flasher fail to operate properly, a solid-state output and an isolated SPDT relay energize. When connected to a site monitoring system, this unit provides the remote beacon monitoring protection required by the FAA/FCC. On a multiple beacon structure, one unit is required for each two-lamp incandescent beacon (one unit per beacon for LED beacons).

動作
If one lamp in an incandescent beacon fails, the relay and solidstate lamp failure outputs energize after 10s. If the flasher fails in the ON or OFF condition, the relay and the solid-state flasher failure output energizes after 6s. If both failures occur, all three outputs energize after their trip delays.
Note: If both incandescent lamps fail, all three outputs will energize. The relay and solid-state flasher failure output energizes after 6s, and the solid-state lamp failure output energizes after 10s.

Toroidal current sensing
Failsafe beacon monitoring
One isolated, 5A, SPDT alarm output plus two, 1A, solid-state line voltage alarm outputs
Fixed trip delays for flasher (6s) and lamp (10s) failures

Reliable low cost monitoring of the flasher and lamps through built-in CT and provides isolation from the monitored circuit
Alarm monitors for failed incandescent lamps in addition to flasher function
When connected to a site monitoring system, it provides the remote beacon monitoring protection required by the FAA / FCC.
Prevents nuisance alarms

FB120A FB230A 部品

リンクがクリップボードにコピーされました

2 合計結果の 1 から 2 までを表示

	品番	アクション	Input Voltage (V)	Output Form	Trip Delay Range	Output Load Rating (VA)	Dimensions
	Series: FB120A FB230A - Flasher and Incandescent Beacon Alarm Relay Series: FB120A FB230A Flasher and Incandescent Beacon Alarm Relay	データシートサンプル請求詳細を見る	120 V ac	3 total: 1 relay and 2 solid state	Flasher failure: Fixed at 6 s; -0/+40; Lamp failure: Fixed at 10 s; -0/+40%	One isolated SPDT relay rated 5 A resistive; Two solid-state line voltage outputs rated 0.5 A steady and 5 A inrush	3.5 H x 2.5 W in. (88.9 x 63.5 mm)
	Series: FB120A FB230A - Flasher and Incandescent Beacon Alarm Relay Series: FB120A FB230A Flasher and Incandescent Beacon Alarm Relay	データシートサンプル請求詳細を見る	230 V ac	3 total: 1 relay and 2 solid state	Flasher failure: Fixed at 6 s; -0/+40; Lamp failure: Fixed at 10 s; -0/+40%	One isolated SPDT relay rated 5 A resistive; Two solid-state line voltage outputs rated 0.5 A steady and 5 A inrush	3.5 H x 2.5 W in. (88.9 x 63.5 mm)